Hot vulcanized rubber conveyor belt joints reasons rather hard to edit our conveyor belt after achieving the joint but is often found in joints harder than other parts of the conveyor belt vulcanization bonding process is actually vulcanized rubber crosslinking process continues. Because of the time required for vulcanization heat, pressure conveyor belt factory vulcanized joints, and requires a relatively long time, after a relatively long period of curing to increase the hardness of vulcanized rubber, it will feel stiff joints than other parts of the conveyor belt joint method The quality of the adhesive and release layer is uniform about the vulcanized joints grinding, grinding wheel is best to use an electric wire. Remove the glue, must not worn with the core, polished clean, dry cleaned with acetone, and then use infrared light roast hot to 70 ~ C below, and then coated with an adhesive. Length of the adhesive through the conveyor belt vulcanized neoprene cement joints, plus 3% -5% of the curing agent, usually a polyisocyanate resin, both stir rapidly applied to the polished surface of the peeling, generally coated two. James received the first coating agent is 400g / m2, cool and set up sticky. The second channel coated adhesive approximately 350g / m2, cold sticky set up (usually 25-30min, subject to weather). Winter use infrared light baking. Plant conveyor belt curing joint | vulcanized joints | is a new service provided by the conveyor belt tear scratch Linqu is a new rubber products business. Linqu Cheng Shin Rubber products business (www.sdshusongdaijietou.com) strong, credible, Shandong Weifang transportation equipment industry has accumulated a large number of loyal customers. The company better work attitude and continuous improvement is a new innovative ideas will lead into the brilliant and you work for a better future!